So you bought an extra remote for your car, but you
don't want to pay to get it programmed?
That's good--a Ford dealership would rip
you to pieces with the amounts of money they'd charge to program it!
Here's a few easy steps to follow to program the remote yourself:
1.) Once you have your remote transmitter, go out to your stang and pop the
trunk.
2.) Inside the trunk, pull away the carpet
on the driver's side to find the anti-theft box. This box contains a gray plug,
which contains 2 metal prongs.
3.) Go put your key to the "ON"
position and jump the two prongs together. You can use anything that will hold
an electric current; I used a pair of plyers.
4.) Now all you have to do is press any
button on your remote transmitter. Once you do this, your car will lock and
then unlock. This lets you know the the programming was a success. Enjoy your
new remote!
Disclaimer
Disclaimer: The content offered here was
written exclusively by the Author above for V6Mustang.com. Any unauthorized
redistribution or publication of the content on this page elsewhere is illegal
and will be punished by the fullest extent of the law.
The advice, tips, suggestions and information
offered here are exclusively the opinion of the Author and does not nessesarily
reflect the opinion of V6Mustang.com it's owners, affiliates, or sponsors. Following
the suggestions found on this page will be done exclusively at your own risk.
