08'MustangDude's 2008 Mustang

General Information

Will contain mods, additions, and repairs.

01/29/18 - Bought Car, Smail Kia. The coolant temperature gauge was bad, would never settle
in the same place, so every time it warmed up, it was in a different position. Harsh shift into
reverse. Called while on my way home, they said they'd take care of it. Took it back a week
later, they typed up a one time complimentary repair invoice.

02/9/18 - Gauge Cluster Replaced (With 72910mi) Smail Acura, Transmission Service Smail Ford.
--------> Brake/ABS/TCS Lights On, Incorrect Cluster/Programming.
02/15/18 - Found the air-box lid was not on correctly, locking tabs were not pushed into slots
02/19/18 - Oil Catch can temp install till new bracket arrives.
02/25/18 - Single tube strut brace.
02/18/18 - Catch can finished.
03/16/18 - Added my own trunk light.
03/17/18 - LED Center Brake Light Mod.
03/16/18 - Second Gauge Cluster Replacement - Same Problem (Brake/ABS/TCS MILs on)
--------> Smail Acura Pulled this cluster out, put the 1st one back in and deferred to Smail Ford.
03/19/18 - Decal Template Complete, On Order!
03/23/18 - Third Gauge Cluster Replacement (With 49859 Mi), All Working, Even got a free key made.
--------> Smail FORD Performed This Job, And It Was Done Correctly
03/27/18 - HH OBDII Dongle w/Torque App For Android.
04/05/18 - (First Contact Day) - Accel Supercoil Installed.
04/07/18 - Diablosport Predator U7145 Tuner (SOLD).
04/13/18 - Eonon Android 7.1 4xCore Radio.
04/18/18 - Started Dynamat project in the trunk.
04/20/18 - Gt Style Front Grille w/Fogs & Halos
04/26/18 - Restored Upper Rad Support Brackets, Bolts, Headlight & Upper Bumper cover Bolts
05/03/18 - Engine Bay Dress up; Stainless hex-bolts & anodized washers.
05/04/18 - Spectre Performance Air intake Filter, Rear Side Marker LEDs, Trunk Lid Rear Facing Red LEDs
05/05/18 - 1st Round of Terran Empire Decals (ISS Hood) Applied
05/07/18 - Rear tail LEDs, Reverse LEDs, Front Sidemarker & Signal LEDs
05/14/18 - Finished Engine Bay Dress up, New 19mm Lug Nuts
06/01/18 - Kicker SCS68 Door Speakers
06/09/18 - Infinity PR8603CF Deck Speakers, Dynamat Deck Top and Under
06/14/18 - Cowl Fasteners Replaced With Stainless Bolts & Red Anodized Washers
06/15/18 - License Plate Bolts Done w/Same As Engine bay
06/18/18 - Shifter Bezel Painted & Lacquered, Brushed Aluminum Look
06/21/18 - Shifter Center Cover Painted
06/23/18 - Installed Dual 2.1A USB Port In Place Of Front Power Point
07/09/18 - 4 Channel Remote Controlled Relay Center Installed (LED Strip has been in since March)
07/16-18 - Intune I1000 Tuner to replace the Predator Tuner
07/20/18 - Replaced Spark Plugs, Used NGK 7159 G-Power Platinum
07/21/18 - RED LED Grille L/R Side Back-lighting
08/04/18 - External Weatherproof Volt Meter
08/09/18 - OnStar FMV Rear View Mirror
08/11/18 - Laser Grid Pattern Projector - Front Grille
08/18/18 - Stainless Mesh for Baffle in Oil Catch
08/22/18 - Foam Rubber applied do door switch housings to stop bass rattle
08/24/18 - New Rear Shocks, and a set of BMR Rear LCAs
08/25/18 - Vacuum Caps to Protect Grease Fittings on LCAs
08/31/18 - Push Button for Factory Amps ON/OFF
09/04/18 - OE Switch w/Fog Position Installed
09/15/18 - J&M Panhard Rod, & Diff gear oil change
09/21/18 - 4.7" Black Carbon Fiber Metal Antenna, Detachable
09/29/18 - Prepped and Painted The Outside Of The EVAP System Rock Shield
10/19/18 - Star Trek Gold (Command) Seat Covers
10/28/18 - BMR Panhard Brace
10/28/18 - Front Wheel Bearings
02/13/19 - New Battery
05/02/19 - Trans Catch Hooked Up to Trans Vent
05/10/19 - EGR Block Plate Installed (Removed 5/17/19 - No gains)
05/24/19 - New front Struts & Front End Links
05/25/19 - Lakewood Lower K-Member Brace
06/11/19 - 2nd Decal Template Complete, On Order
06/22/19 - Four of 2nd Set of Decals Applied (Other two, one was in error) - Waiting for Symbols
06/27/19 - New Rear Calipers & Brackets; Painted & Installed
06/28/19 - Hood Insulator Push In Fasteners Replaced w/Stainless Bolts w/Anodized RED Collar Washers
07/03/19 - Final Decals Applied (Front Arrowheads)
07/06/19 - Front Calipers, Brackets & Pads; Painted & Installed
07/14/19 - Bought SR Performance Front 35mm and Rear 22mm Sway Bars, Front Adjustable
----------> Ordered rear bracket and all bushings, & have arrived.
07/26/19 - Passenger Door (Rusted Out At Bottom) Replaced In Michigan (Bought Two Doors in Wayne, Michigan; From an '05 GT)
----------> Both doors would not fit in the car, so he put the passenger side one on. Also gave me rear sway bar mounting hardware.
07/27/19 - Driver Door Replaced; Was Really Not Necessary, But I Got Both Done.
08/03/19 - Installed A 7805 Voltage Regulator For Factory Amp Turn On (Ditched The Resister)
08/03/19 - SR Performance Rear 22mm Sway Bar Installed
08/10/19 - SR Performance Front 35mm 3-Way Adjustable Sway Bar Installed (Replaced OE 32mm)
08/21/19 - Changed Radio's Vehicle Emblem BOOT Screen to Terran Empire Logo
08/26/19 - "Saucer Section" Running Lights "HI" Blink Done, Need Resister For "LO" Constant On Side
09/06/19 - Resister Added For ON Low, Flash High
09/11/19 - Serpentine Belt Replaced
09/18/19 - Front Rotors Replaced
09/21/19 - Fuel Filter Replaced. New Nuts On Plastic Shield
10/09/19 - Updated EONON Android Radio Firmware
10/12/19 - New spark Plug Wires, 8MM Suppression
10/12/19 - '11'-14 Mustang 19"x9" OEM 5-Split Y Spoke Rims (From cars with Brembo Brake Package)
11/14/19 - J&M Rear Upper Control Arm
11/18/19 - Replaced Old Factory Loom On Plug Wires With New
11/18/19 - Continued Engine Bay Dress Up - Braided Loom
12/12/19 - Replaced Front Wheel Bearings
12/12/19 - Replaced Catch Can AN10 Braided Hose With New, Better AN10 Hose
----------> Pulled The Fittings From The Original Plastic & Placed Directly In Hoses w/Crimp Clamps @ Fittings
12/13/19 - Replaced Rear Axle Assembly, Using All Existing Suspension Components
----------> Removed and pressed in a new LCA bushing on replacement axle housing
----------> Wire brushed diff cover bolt heads and threads, mounting surfaces on cover and diff housing
----------> New gasket (with tube of gasket maker), painted diff cover & bolts. Fresh gear oil 70W90, .5qt 70W140
12/20/19 - Replaced Driveshaft, Cold Galvanized Mating Surfaces
----------> Replacement dropped at shop 12/18/20, from the car the rear axle assembly came from
----------> Driveshaft sent taken Drive Line Service 12/18/20 for R&R; New U-Joints, Service & Lube slip joint, Balancing
----------> Driveshaft picked up from Drive Line 12/19/19, and painted
12/20/19 - Front rotors replaced; warranty item, no cost (did not fox wobble issue)
12/27/19 - Transmission Mount Replaced. Inner Ties, and Tie Rod Ends Replaced, & Alignment - Wobble Issue Fixed
----------> Rear thrust angle -0.19 -May need new LCA bushings
12/28/19 - Two New Front Tires
12/30/19 - Front left wheel bearing growling, replaced with another "Driveworks" bearing
01/09/20 - Front right LCA replaced. "Driveworks" wheel bearings removed, returned, and swapped with MOOG and installed
01/14/20 - HVAC blower motor resistor replaced


What was the deal with all the gauge clusters?
All that you are you owe to your parents. Why don't you send them a penny and square the account?

As far as your so called Metaphors, they'd probably be just a wrong as your Analogies.
What was the deal with all the gauge clusters?
Can I borrow your face for a few days while my ass is on vacation?
Diarrhea of the mouth; constipation of the ideas.

SO, here, I need you to make a mental note; oh, I see you're out of paper, never mind....
What was the deal with all the gauge clusters?
And the little boy keeps coming back for more. Can't help yourself, can you? The silly little human boy with his toy. A hypocrite who doesn't even know the meaning of the word. You will be back, because you're moron, a member of the 64%. You're the reason the gene pool needs a lifeguard. And if I wanted to hear from an asshole, I'd fart.

Item information

Added by
Last update

More in 2005-2010 V6 Mustang Garages

Share this item