Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

six gun's '99

  • Owned since 2001, bought with 22k miles. Now at about 205k and still running strong!

    Tricoat paint - Lexus white pearl over factory Ford Ultra White

    Original 3.8 engine
    -VAPauto's Windstar 3.0 conversion with 65mm throttle
    -Long tube headers
    -Underdrive crank & water pulley
    -True duals with Flowmaster Delta 50s

    G-Force T5 transmission
    -2.95 1st / 0.59 OD (4-5 shift is a doozy!)

    Aluminum driveshaft

    8.8 rearend
    -3.73 gear + traction-lok

    Did 9.90 in the 1/8 mile with 3.73 gear + full interior + stereo system. Installed Mickey Thompson ET street R, bias ply rears with Sportsman skinnies up front on Center Line Split Spoke 15s. Due to lack of engine torque I now launch at redline even with over-inflated slicks ha.

    Show it at Sturgis Mustang Rally every year in Sturgis, SD. Placed 10 of the 11 years they had it in show&shine - 6 first-place wins :D

    I had Erick at Autobadges.com make me a custom "V6 Low Output" badge ha. Seemed fitting.

    Summer of '16 I did my first projector headlamp retrofit. It's not a bad job if you can learn to carefully take the headlamps apart. Well, and seal them properly too. HID projectors, or perhaps projectors in general, make a world of difference in the new edge lamps vs stock. Recommended! Then this summer ('17) made a second set of lamps with Morimoto Mini H1 7.0's and added some pony logos inside the headlamp bezel.

User Comments

To post comments, simply sign up and become a member!
  1. SixBangerBlue
    Nice numbers.
      six gun likes this.
  2. 03-3.8stang
    welcome to the 200k club :D
    That lexus white is gorgeous!
      six gun likes this.
    1. six gun
      Thanks! I'm glad I chose to add that at time of repaint anyway. The original paint was starting to let go on certain body lines and had to fix that. So much for my supersixmotorsports budget. Ha. That's when I decided Windstar manifold conversion route.
      six gun, Feb 23, 2016
  3. ProjectVicky
    New Edge Mustang headlights always look great. I can't figure out how to custom make a set of SN95 headlights without them looking like junk.
  4. oathsv6
    you should look at my post i made a 112mm throttle body intake you would go crazy over much better gains then that intake