Search results

  1. 38stang

    Project New beginning

    Awsome man. Looks like maybe 2 of us.
  2. 38stang

    Project New beginning

    Its been a long time and I don't know if anyone is on here anymore. but here it goes. I still have the car and have added a full UPR chromoly front suspension and solid motor mounts. I also upped the meth to a 1000cc nozzle and pushing 35# of boost through the thing. I haven't been to the track...
  3. 38stang

    My twin turbo build

    It more than likely uses 351 rod bearing's.
  4. 38stang

    My Turn @ Pulling the Trigger on a Twin Turbo

    You might want to make a call or e-mail sct. I had to go through the sct training course as well. If you don't the epa can come after you for violations as well. Sct has had to pay $300,000 in fines already
  5. 38stang

    Project New beginning

    Sorry I haven't been on here in a while. I finally ordered the cage and installed it. And I also re-adjusted the rear suspension, centered the diff and reset the pinion, it may need a few more deg's. but for now Im testing with it 2 degs down
  6. 38stang

    Official 1/4 Mile Time Slips

    Thanks man. Im running 10.80's now. I just don't think I have it post yet.
  7. 38stang

    Project New beginning

    I'll be ordering a cage before long and some suspension work as well, I'm hoping;)
  8. 38stang

    Project New beginning

    Sorry I wasn't very clear. Your point is valid and correct. I was just trying to say you also need to control the chassis movement as well. That can and will affect traction as well with a high powered car.
  9. 38stang

    Project New beginning

    When you making a lot of power the body will roll to the right and unload the right rear tire. With a anti roll bar like one from UPR or the other manufacturers it helps plant that tire and keep it from unloading and spinning.
  10. 38stang

    Project New beginning

    The throttle body had a big seal leak on the shaft. So I had to replace it with the sve throttle body, that was the reason why I had to read Tunes.
  11. 38stang

    Project New beginning

    Well I finally found the hung WOT problem. The screws for the throttle blade where loose and the blade was shifting around just enough to make it stick open. lucky for me the screws had been battered on the end so they wouldn't come all the way out. I'm not sure I'd recommend a SVE throttle body...
  12. 38stang

    OIL PROB

    That is the correct oil
  13. 38stang

    Brakes don't stop the car..

    What is your cam duration and LSA
  14. 38stang

    Project New beginning

    I would like to have a trans brake. But I need a stub shaft swap first or it will snap from the hit off the trans brake. I've seen it a number of times and it usually takes the drum with it.
  15. 38stang

    Project New beginning

    All I've got is the UPR pro upper and lower control arms, 8 way adjustable shocks and no rear sway bar. Not having a bar might be part of the problem. Motormile dragway is about 3 hours away from me I'd have to plan that one out. I'm in the Richmond VA area. It would be nice to race with...
  16. 38stang

    Project New beginning

    I need some suspension and chassis work done thats as good as I can get it with just UPR rear control arms. Every thing else is stock with 200k and no subframe connectors or cage.
  17. 38stang

    Project New beginning

    When my t-body hangs I can open the hood force it closed be hand, but when you let go it will pop back open. If you keep forcing it shut it will finally stay until you go wot down the road again.
  18. 38stang

    Project New beginning

    Here's the video of my pass. Watch the boost gauge on the left of the gauge pod. The gauge maxes at 20psi and it almost wraps around to the vac side.
  19. 38stang

    Official 1/4 Mile Time Slips

    Can I get an update please. new fastest time.
  20. 38stang

    Project New beginning

    luckily I didn't have it that bad, things could have been worse. I couldn't find the cause either and it only happens when its hot or you use your foot on the pedal, if you open it by hand It dosent do it.
Top