Search results

  1. E

    Turbo 4.2 stroker part out

    still active on here ? curious on the turbo kit
  2. E

    Brown contaminant in coolant

    Last year had the same thing, except i knew right away it was a headgasket. Not saying yours is, but they are very suspect on these cars it seems
  3. E

    car wont start

    check your firing order ?
  4. E

    Whats everyone using for Tuning.

    thanks for the advice, guna look into the SCT Advantage. Cluster loss isn't a issue to me, its a pretty much a weekend warrior at the track so as long as I can hook up the basics to gauges it wont bother me none. which ms you running?
  5. E

    Whats everyone using for Tuning.

    can I make changes like I stated? I cant use preset tunes... cars supercharged in a very un orthodox way..
  6. E

    My manifold bolt is stripped

    If your replacing the cat y pipe, cut the pipe, un bolt the header from the head, and proceed from there. If not replacing said pipe, and doing a gasket, buy some advil, and set aside a few hours of wrench throwing. PB blaster and pray my friend
  7. E

    My manifold bolt is stripped

    What are you replacing? Makes a world of difference for my answer.
  8. E

    1999 f150 4.2 swap with 3.8 mustang block

    Another thing to check would be key on check for 12v at the pack
  9. E

    1999 f150 4.2 swap with 3.8 mustang block

    If not mistaken, theres 3 coils in the coil pack, take a ohm reading across all of em, if there all within each other, check the pins on the plug into the coil pack
  10. E

    Whats everyone using for Tuning.

    Im not talking about mail order tunes, im looking towards the Turbo/Sc'd guys. Whats everyone using for making adjustments to the fuel and spark tables. Ive heard of the Moates, any others?
  11. E

    00 turbo singleport project

    Do you still have that Moates tuner laying around by chance
  12. E

    3.8 to 4.6 Swap questions

    Theres a company that can turn off PATS systems, you just mail him yours and he sends it back
  13. E

    3.8 to 4.6 Swap questions

    K Members are the same to my knowledge just the mounts interchange. Gt cooling parts. Swap the 8.8 rear while your at it, its a simple swap. Use the engine harness, ecu from the GT car, I don't know if the body harnesses are the same, sorry
  14. E

    00 turbo singleport project

    What kind of hot side piping? name brand kit or one you had made. Feel free to PM a pic or 2 or 4 lol
  15. E

    Very long shot. Piston to valve clearance.

    I read what had to 5-6 different sites for info as to what IM looking into, and found that you can mill heads quite far on these without the valves talking to your pistons.. but the problem I ran into in most of the posts was misalignments happening with components after you mill past .030, the...
  16. E

    Tma turbo hot side

    No harm no foul, Thanks for answering though. I went with the Morana m112 adapter yesterday cause my friends selling his stock setup off his cobra. :thumbup:
  17. E

    Very long shot. Piston to valve clearance.

    Disregard found my answer.
  18. E

    Tma turbo hot side

    I tried a few weeks ago, no response yet.
  19. E

    Very long shot. Piston to valve clearance.

    Well as it says anybody happen to stumble across this info at any point. im trying to search the web for it and having no luck
Top