Search results

  1. vsixxer24

    SCT XCAL X3 3000

    Selling my xcal x3, its the 3000 not 3015. it is unmarried, has 1 unlock left, comes with firewire and usb cable. asking 200 obo
  2. vsixxer24

    39lb Injectors, BA5000 MAF, LC-1 Wideband, and more..

    Do you still have the injectors?
  3. vsixxer24

    Boost in crankcase

    that looks like exactly what I need.. Thank you!! :thumbup:
  4. vsixxer24

    Boost in crankcase

    Excellent, thank you very much! Are you using EGR?
  5. vsixxer24

    Boost in crankcase

    So, probably get a better check valve? It leaks with the one I have now. Can you post a diagram/pictures of your setup? Sounds like something I need to change too..
  6. vsixxer24

    Boost in crankcase

    I've been stripping and reapplying the sealant on the pan everytime, but never thought it was the pan gasket. I took it to ford just to have the leak checked and they told me it was the rear main a few weeks ago and every new leak, I'm just pointin to the rear main again. Everytime I replace it...
  7. vsixxer24

    Boost in crankcase

    anyone have/had any oil leak problems once in boost? My rear main started leaking, replaced it and its been about 500 miles or so and it is leaking again. I put another new seal last week and I'm about 200 miles in and I am starting to notice oil spots on the driveway again..I put the car up in...
  8. vsixxer24

    Blow-off

    Interesting, same size as stock just different material? Do you know the material? 6061 7075?
  9. vsixxer24

    Blow-off

    Wow, this is for the power steering pulley? What is so special about the PS pulley that takes 5 weeks??
  10. vsixxer24

    Blow-off

    Why are you having your pulley machined? Lightweight ?
  11. vsixxer24

    Blow-off

    That would be awesome! Thank you!
  12. vsixxer24

    Blow-off

    Hello, so i am looking into getting another blowoff/bypass valve for my setup. I lost a few parts on the freeway including my proflow valve.. Ended up fabricating a new one piece tube for it but now need a valve. Anyone run with an atmosphere setup or all recirculating? This is for a procharger...
  13. vsixxer24

    Blow off - bypass - proflow

    Anyone have a BOV for a procharger? I lost mine on the freeway yesterday.. Thanks!
  14. vsixxer24

    No start

    I checked all the fuses/relays and all were good. I hooked up a new fuel pump and turned the key on and then cranked and it spun it great, so I knew the pump in the tank was receiving power. Then I disconnected the fuel line from the filter to bypass the filter and any other flow...
  15. vsixxer24

    No start

    There is a fuel pressure sensor that has a relief valve on it to hook up a gauge to read fuel pressure. Last time I checked, I opened that valve and a small but hard burst of gas shot out (being the system had 30-40psi built up). When I do that now, there is no fuel that comes out of that valve...
  16. vsixxer24

    No start

    Hey guys so I went to start up the car this morning and it wouldnt go. Cranks over normal and the spark is there. I can hear the fuel pump prime when the key is turned to the "on" position. It makes the hmmmm sound for a second then stops however, when cranking over, I have 0 pressure at the...
  17. vsixxer24

    3.8 to 4.3 Round Two!

    Thank you! I just did my second oil change at 500 miles. Going pretty good! Keep getting an EGR P0401 code tho..
  18. vsixxer24

    Steering and Suspension

    I replaced the pump, again and still followed the same instructions for bleeding/venting the system and there was smoke and that sound were still present. Turns out, it was the alternator. Just kicks and giggles, I tested the battery while running to see voltage and it was at 8.2v. Got a new...
  19. vsixxer24

    Steering and Suspension

    Okay, great. Do you know where to get an aluminum setup? Whats the reliability of an aluminum rack? The old pump was leaking around the return line on the housing. I replaced the pump with reservior after being topped off, it was only whinning for a little bit before it started smoking...
  20. vsixxer24

    Steering and Suspension

    Hey guys, I replaced my p/s pump yesterday with a duralast pump (it was only one in stock locally) Not a fan of the pump, I know it takes 500 miles or as they say it does for the whining to go away but my issue is the pump is smoking and has a vibrating hum sound to it. Looking for an...
Top