swap

  1. Echonan

    3.7 Cyclone V6 Swap

    So I don't know if anybody uses this forum anymore, however I swapped a 3.7 V6 out of a 2014 Mustang into my 2000 New Edge. I wanted to see if that's something that would interest anybody here. I can post pictures and how I did it if anybody is interested or wants help on how to do it themselves.
  2. J

    2000 mustang t5 swap

    I have 5 speed swapped my mustang it has stock gears in it but when I hook up the speedo to the trans it just winds it all the way to 120 when I’m barely moving and I’m unable to get above 40 because it thinks it’s going 120 and cuts fuel is there any easy way to fix this other than just...
  3. J

    Auto to manual swap

    Is the driveshaft in the 99-04 automatic mustang the same as the manual mustangs
  4. W

    4.2 Tuning

    In a few weeks I'm installing a comp cammed 4.2. I need options for tuning it as dyno's and tuners are not common or cheap in Iowa. I currently have a Rev-x tuner from bama. Could they do a daily tune? Any information or experience would be great. Thanks.
  5. D

    01 3.8 engine to 00

    I have a wrecked 01 mustang with a good engine and was looking into buying 00 mustang that needs engine, both have 5 speed transmission. Is there any differences across the 2 or is it just plug and play?
  6. D

    01 3.8l install on 00

    I have a wrecked 01 mustang with a good engine and was looking into buying 00 mustang that needs engine, both have 5 speed transmission. Is there any differences across the 2 or is it just plug and play?
  7. J

    Lowered EGR Bracket For a 99 mustang windstar swap

    Hello everyone, I am setting up to start a windstar swap on my 99 v6 Mustang. The only part that i am having trouble with is the lowered egr bracket from the windstar so that i can keep my egr. Does anyone know the part number and/or where to procure one? Thanks in advance for any help.
  8. Stephen K

    2000 v6 Completed Windstar Finally!! Stock Hood!

    Hey everyone!! It has been quite sometime that I have posted in here but I finally completed my windstar swap after a lot of careful planning! I plan on posting my video and some links to some parts and kits maybe once i hit some of the local junkyards. I am trying to keep the windstar spirit...
  9. nathaniel69x

    94 v6 mustang to 2002 v6 complete engine swap

    what do i need to make this work pcm fuel rails etc?
  10. T

    I need some Help

    Hello guys this is my first post on this forum, So I guess I will tell you about my car and What I need help with. I have 95 v6 mustang 5 spd. I bought it for 1k, put another 1k in to get it to pass inspection and now I am dallying it, in New England, which is fun, this car is the reason I...
  11. BryanSmith

    Swap a rear axle from a '99 into my '98

    My '98's rear axle is not long for this world...whines and howls loudly. I suspect a pinon bearing, but I am not gonna get to deep in investigating who, what, where and why. At my local Pick a Part yard, I have been harvesting parts from a really nice '99 V6 Mustang. My plan is to go drop that...
  12. Jonathan Webster

    My first engine swap.

    Hi, I'm new to the forums. I just got a 2001 Mustang convertible for 350$ that has a bad engine(Hard knocking), clean undercarriage with 180k. I was trying to figure out what would be the most cost effective way of getting it up and running. I will be doing a straight swap with a free motor I...
  13. Jonathan Webster

    V6 Swap question

    Hi, I'm new to the forums. I just got a 2001 Mustang convertible for 350$ that has a bad engine. I was trying to figure out what would be the most cost effective way of getting it up and running. Issue: Engine has a really bad knocking (Sounds like it will explode at any moment) I have a...
  14. O

    Putting a engine from a automatic 99 into a manual 95

    I have a motor from out of a 99. It's an automatic. I want to put it into a 95 that has a manual transmission. Has anyone done this?
  15. dave2000

    2004 5speed swap

    Hey guys, recently i picked up a 2004 v6 auto, ultimately I'm gonna use my 2000 as a parts car now because the 04 is in way nicer shape. One of the things i want to do right away is take my 5 speed out of the 2000 and swap it to the 04. I've been foing my research and it looks like the ecu has...
  16. 01 Stang owner

    V6 to V8 Swap Help!

    Okay so I'm doing an engine swap on my v6 to a v8. I have come across a good deal for a v8, wiring harness and computer for $750. I have seen the other threads, no I am not interested in buying a v8 car. This is my first and I want to keep it. I wanted to know what do I truly need to do this...
  17. Echonan

    Engine removal/installation?

    Does anybody know of a guide for the removal and/or installation of a 3.8 V6 or where to find one? I can't find a guide or anything for the V6. Only for the GT. I'm planning on taking out my 3.8 this weekend and would like to be informed before I start rather than winging it.
  18. E

    Engine Swap Wrong Engine?

    2001 V6 Automatic. Ok, stupid question because I'm not Einstein nor am I a mechanic. (Im a welder) I bought a used V6 to replace my blown-up engine. My car is an automatic and they sold me an engine that was in a manual car. "NO Sweat" I thought. "Just remove the clutch and use the...
Top