Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

[email protected] V6 4.0 w/8.5LBS of Boost

Discussion in '2005-2010 V6 Mustang Tech' started by Rygen, Aug 12, 2006.

  1. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
    Well, I finally broke into the 12’s, and not just once, but three times in a row!!!! So, I went to the Northern Virginia Mustang Club track day event. Track was ours at 8am this morning!!! And temperatures were in the 70’s!!!

    Here were my first batch of runs:

    • [email protected] MPH w/2.12 60ft
    • [email protected] MPH w/1.98 60ft
    • [email protected] MPH w/2.03 60ft
    • [email protected] MPH w/2.00 60ft

    At this time I was so close I was going nuts. I was in the pits with Raneboxcyx, Excepcion13 and Fitbikeco!!! So, I gotta launch harder….so I call Scrming up, he says did you check your front tires, make sure they are at 50psi…I’m like no!
    So I do that, I was down to 30psi in the front. Doh!!! Bring them up to 45psi, then check the back…30psi….bring them down to 28psi.

    Then I take out the jack, empty the glove box, take out the carpet/wood piece from the trunk. Then a fellow S197 GT owner (2k05gt) says, the lower portion of the seat snaps on, its 10lbs, but everything counts as close as you are. So he takes out the lower portion of my back seat…..

    Get up to the line, launch at 2500 to 2600, spin a tad at the line…..

    • [email protected] MPH w/1.99 60ft


    Ranebowcyxx says go back and back it up……

    • [email protected] MPH w/1.93 60ft

    Holy crap, my best ever!!!!! Then I go a 3rd time before the event ends…..

    • [email protected] MPH w/1.97 60ft

    So my best ever was a 12.8!!!!!! Excepcion13 did great to, for his first time out he was hitting mid to low 13’s with no problem, no power shifting, launching light, just taking it easy. He got a 13.1 and is trapping at 109MPH!!!! Holy crap.

    Raneboxcyx did great too, hitting high 14’s and a best of 14.90 I believe. And Fitbikeco really impressed us, hitting 14.9’s consistently, and this is with only a CAI, Dougs tune and MRT muffler. He has an OPEN diff!!! Stock gearing and is still doing great!

    It was great to see the 4.0 stangs representing, and they were not the slowest stangs out today.
    :thumbup:
     
  2. neatofrito1618

    neatofrito1618 ...

    Joined:
    Sep 12, 2005
    Messages:
    21,861
    Likes Received:
    7
    Trophy Points:
    48
    Congrats, I told you all it took was some better weather.:) :thumbup:
     
  3. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
    Thanks man! You were right. I have on order a new driveshaft and 3k rpm stall. So we will see what I can get with that.
     
  4. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
  5. GT-EATER

    GT-EATER Moderator

    Joined:
    Oct 24, 2003
    Messages:
    3,322
    Likes Received:
    1
    Trophy Points:
    0
    Location:
    JACKSON MISSISSIPPI
    Congrats on hitting the 12's :thumbup:
     
  6. Mustang007

    Mustang007 Fire Medic

    Joined:
    Jan 3, 2003
    Messages:
    5,175
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    GA
    Thats awesome Rygen :thumbup:.

    You 4.0 guys are already kicking ass.
     
  7. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
    Thanks, appreciate the props.
     
  8. cooldbz12

    cooldbz12 Well-Known Member

    Joined:
    Feb 4, 2005
    Messages:
    2,202
    Likes Received:
    0
    Trophy Points:
    46
    Location:
    FS, TX
    Damn, 12.8 on only 8.5psi that is asweome! how much Boost does it take a 99+ 3.8 to run a 12.8?
     
  9. Jhsephiroth

    Jhsephiroth ///Grafik Deziner

    Joined:
    Feb 28, 2005
    Messages:
    2,363
    Likes Received:
    0
    Trophy Points:
    46
    Location:
    Memphis, TN
    Depends on what internal work has been done. Without internal work i'm guessing somewhere between 10.5 and 12 psi on a coupe mustang. I'll find out Tuesday what I run.
     
  10. Kuplex

    Kuplex Retired Admin

    Joined:
    Jan 14, 2004
    Messages:
    33,309
    Likes Received:
    38
    Trophy Points:
    58
    Location:
    SC
    That's awesome, Rygen. Keep up the great work!
    [​IMG]
     
  11. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
  12. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
  13. Vash

    Vash 3.8= drama for your momma

    Joined:
    Jan 12, 2005
    Messages:
    5,058
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    NC
    i noticed how alot of the forced inducted V6's sound the same... like on a 3.8 and a 4.0

    good times by the way :thumbup: you rock
     
  14. corndizzle

    corndizzle Lost Angels Member

    Joined:
    Apr 19, 2006
    Messages:
    229
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    we snoop dogg is from
    i already gave my congrats to you on 4.0collective rygen but once again congrats im just curious what your makin to the rwhp cause im making about 8.5 to 9psi but i havent taken it to the track yet
     
  15. Rygen

    Rygen New Member

    Joined:
    Oct 8, 2005
    Messages:
    177
    Likes Received:
    0
    Trophy Points:
    0
    Thanks all.

    CD,

    I'm at 299rwhp and 347rwtq on a mustang dyno. Note I also have a significant amount of suspension modifications and M&H DR's.
     
  16. corndizzle

    corndizzle Lost Angels Member

    Joined:
    Apr 19, 2006
    Messages:
    229
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    we snoop dogg is from


    jesus christ:eek: that a **** load of tq how'd you get that much tq
     
  17. neatofrito1618

    neatofrito1618 ...

    Joined:
    Sep 12, 2005
    Messages:
    21,861
    Likes Received:
    7
    Trophy Points:
    48
    For a Mustang dyno those are good numbers.:thumbup:
     
  18. donks232

    donks232 New Member

    Joined:
    Jan 31, 2006
    Messages:
    993
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    g-ville FL
    whats the highest PSI a v6 can run?

    shelby needs to make the cs6 or w/e its called, and have everything forged so we cna have a v6 terminator :crazy:
     
  19. tedness

    tedness Mellow Yellow

    Joined:
    Jul 4, 2005
    Messages:
    7,822
    Likes Received:
    7
    Trophy Points:
    48
    Location:
    Tallahassee, FL
    cs6 is made.
     
  20. donks232

    donks232 New Member

    Joined:
    Jan 31, 2006
    Messages:
    993
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    g-ville FL
    not on a large scale