Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

2000 v6 AOD to T5

Discussion in '1994-2004 V6 Mustang Tech' started by Aquick6, Jan 11, 2019 at 8:19 PM.

  1. Aquick6

    Aquick6 Member

    Joined:
    Jan 1, 2018
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Hey All,
    In the middle of the AOD to T5 swap and I am a lil stuck on the electrical. I am trying to use the stock AOD wiring. The issue is I am not seeing any information on how to add the reverse light plug and what to remove that is no longer needed.
    Also there is a cable that use to connect to the AOD shifter that would force you have the ignition set forward before you could move from park what happens to that?
    Lastly, how many plugs should be connected to the pedal assembly? I only have one but a video I watched from LMR had two. Not sure if that was just because he was doing it on a fox body or what.

    Any help would be greatly appreciated
     
  2. Aquick6

    Aquick6 Member

    Joined:
    Jan 1, 2018
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Here is what I am talking about
     

    Attached Files: