Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

3.8 L cam bearing positions

Discussion in '1994-2004 V6 Mustang Tech' started by Sjo Svo, Dec 13, 2017.

  1. Sjo Svo

    Sjo Svo New Member

    Nov 2, 2017
    Likes Received:
    Trophy Points:
    I have a 1998 Mustang 3.8l and need to know the position of each camshaft bearing oil hole passage, when I took the bearings out number two bearing was the only one that a oil passage hole aligned with the oil passage hole from the crank journal. Each bearing has three holes I can not find info on the correct position. Any help would be appreciated.
    Thank you