Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

Bag o nitrous?

Discussion in '1994-2004 V6 Mustang Tech' started by Harper, May 5, 2016.

  1. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    any of you guys ever run the compucar bag o nitrous on your V 6 stang?
    How big a shot? 75?
    How did it do?

    I will running an automatic v6 and am hoping to spray at least a 75 shot and it hold up well.
    Thanks
     
  2. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    wow not everyone at once?

    for this to be the oldest forums on V6's it appears to be quite "dead" wtheck?

    NOBODY running Nitrous?
     
    Srg3.8 likes this.
  3. 6 Shooter

    6 Shooter Well-Known Member

    Joined:
    Jan 4, 2013
    Messages:
    1,338
    Likes Received:
    226
    Trophy Points:
    73
    Location:
    Dallas, TX
    I ran nitrous a little in the past. Used it on top of a D-1 Procharger setup. Ultimately cracked a crankshaft using both together. Used a micro switch on the throttle body to engage at 7/8 throttle setting. Sprayed using 6 pills, one in each long runner. Think my pills were 15s or maybe 19s.
     
  4. JTsStang

    JTsStang Boosted V6

    Joined:
    Aug 23, 2008
    Messages:
    3,351
    Likes Received:
    58
    Trophy Points:
    58
    Location:
    East Coast
    That compucar kit is dry. It will work but you need a tune for it. Much easier to tune using a wet kit. I spray to spool my turbo before I installed the trans brake. I keep it on the car just in case of grudge race it's there if I need it.
     
  5. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    Thanks for the replys!
    So both u guys running single turbos? I guess there has to be a limit on horsepower a v6 can handle. But turbo and nitrous... I am impressed. Especially with those times
     
  6. JTsStang

    JTsStang Boosted V6

    Joined:
    Aug 23, 2008
    Messages:
    3,351
    Likes Received:
    58
    Trophy Points:
    58
    Location:
    East Coast
    Mine is a single 66mm but may swap it for a 70mm. Phil is running twins. Our motors are both 260 ci 4.3l stroker but his has more work done. Tune is the key to keep them together, that and good fuel. I run vp leaded 110 on the juice and boost also keep timing very conservative. The times in my sig was on 17psi and 50 hp wet shot with 16* timing on 110 oct. I've been 104mph in the 1/8th on boost alone. Once I get boost in the mid 20's it should be a low 6 sec car, I'm hoping anyway. Nitrous is the ****! I'd spray 200+ hp if I did not have the turbo lol.
     
    Harper likes this.
  7. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    Now that I why I came here... To find out how to bust someone's ass with "just a lil 6 cylinder" lol

    Most of my power will more than likely be from nitrous.

    I would be more than happy to build a stroker though. A quick lil mustang that I could drive anywhere everyday (if I wanted too) and still have a blast in from time to time.
     
  8. kitsune1324

    kitsune1324 Member

    Joined:
    Feb 17, 2014
    Messages:
    90
    Likes Received:
    4
    Trophy Points:
    18
    Location:
    Arizona
    Phil, here's a pic of your intake for him. Looks great in person and is very well built!
     

    Attached Files:

    Harper likes this.
  9. 6 Shooter

    6 Shooter Well-Known Member

    Joined:
    Jan 4, 2013
    Messages:
    1,338
    Likes Received:
    226
    Trophy Points:
    73
    Location:
    Dallas, TX
  10. Spdricer

    Spdricer Active Member

    Joined:
    Jul 29, 2016
    Messages:
    344
    Likes Received:
    27
    Trophy Points:
    38
    Dam that intake is bad ass
     
  11. JTsStang

    JTsStang Boosted V6

    Joined:
    Aug 23, 2008
    Messages:
    3,351
    Likes Received:
    58
    Trophy Points:
    58
    Location:
    East Coast
    That is bad ass! I've always wanted to build a nitrous car. I bet you could spray up to 300hp through that intake. 200 on direct port and have an additional 100hp on a button lol.
     
  12. Spdricer

    Spdricer Active Member

    Joined:
    Jul 29, 2016
    Messages:
    344
    Likes Received:
    27
    Trophy Points:
    38
    Haha i know a good thing wen i see it huh! Lol dam i can only imagine wat that would be like to have an instantaneous 300 hp! At the push of a button....
    Must be an amazing feeling
     
  13. Captain Max Silver

    Captain Max Silver Captain Max Silver

    Joined:
    Jul 6, 2015
    Messages:
    131
    Likes Received:
    26
    Trophy Points:
    38
    Location:
    Sebastian, Florida
    NOW That's A INTAKE SYSTEM!!
     
  14. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    dang, i was thinking more along the lines of about 70 to 90 hp dry shot.
     
  15. Harper

    Harper Member

    Joined:
    May 3, 2016
    Messages:
    36
    Likes Received:
    5
    Trophy Points:
    18
    Location:
    Coffeeville, Alabama
    dam its been 2 years but i finally got the engine swaped lol
     
    Spdricer likes this.
  16. Spdricer

    Spdricer Active Member

    Joined:
    Jul 29, 2016
    Messages:
    344
    Likes Received:
    27
    Trophy Points:
    38
    It beez like that