Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

Checking Auto trany fluid?

Discussion in '2005-2010 V6 Mustang Tech' started by George W, Apr 17, 2007.

  1. Robbie McDonald

    Robbie McDonald New Member

    Joined:
    Apr 22, 2017
    Messages:
    2
    Likes Received:
    1
    Trophy Points:
    3
    This may be something to look into. If anyone else tries this, let me know how well it works out.

    Regards,

    RM
     
  2. 08'MustangDude

    08'MustangDude Member

    Joined:
    Jan 31, 2018
    Messages:
    31
    Likes Received:
    0
    Trophy Points:
    6
    There should still be a drain plug, car idling, warm, you can remove it to
    check the condition of the fluid. There is a fill level plastic tube inside those
    threads, and some will leak out, which is fine. This tube can be removed to
    drain all the fluid, then remove the pan, and change the filter, clean the pan.
    Once the pan is back on, the plastic tube goes back into the pan, then you
    need a tube fill tool to pump fluid back up into the pan while the engine is
    idling. Then you remove the fill tube, let any fluid drain back out then put
    the plug back in. Lots of them are doing this now.. I made my own pump
    with a 1-gallon bug sprayer from Walmart. This is how VW does their
    slush-box fluid changes too.

    If that info is wrong, it is what I read regarding my 2008, how the trans is
    serviced.