Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

ECU and BCM for 3.7 N/A

Discussion in '2011-2014 V6 Mustang Tech' started by rehoward, Feb 11, 2020.

  1. rehoward

    rehoward New Member

    Jan 17, 2020
    Likes Received:
    Trophy Points:

    I am thinking of swapping a 3.7 N/A engine into a non-Ford car. Was wondering if the factory ECU and BCM would support the Mustang 3.7 and MT82 manual trans if grafted into the donor car? Can it be tweaked to remove theft detection and all the bells and whistles not necessary for bare bones engine operation? Can the controller be modified for intake boost?

    I also would like to contact several folks familiar with the N/A controller and also the controller used with the twin Turbo 3.5 as found in F150 trucks.