Headlamp bulb replacement..help please

08'MustangDude

Profile Violation
Yeah, the harness is probably corroded, and stuck to the male
metal prongs on the bulb side. You will nee PB Blaster or other
spray to soak the connector to get it apart. One of mine was
stuck, it took a while to get the plug off the bulb...
 

08'MustangDude

Profile Violation
I put the bulb back into the headlamp for some leverage to pull
the harness off after PB Blasting it a little. This is why you
use dielectric grease in some areas... This is one of those
areas, the plugs are well exposed to the elements.
 

jorez

New Member
It was the driver headlamp, yes, press in and down on the little piece and at the same time PULL the socket out
 
Top