Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

Lower control arm. Help

Discussion in '2011-2014 V6 Mustang Tech' started by magana, Nov 28, 2014.

  1. magana

    magana Member

    Joined:
    Jul 2, 2014
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I ordered rear lower control arms whould I also need to purchase the upper control arm or can I just bolt the lower control arm where the old lower control arm use to be at??
     
  2. Markstang

    Markstang Polishing my banhammer Staff Member

    Joined:
    Nov 5, 2012
    Messages:
    1,004
    Likes Received:
    73
    Trophy Points:
    58
    Should be a straight swap. you shouldn't need a new upper control arm unless the lowers are different length than the stock ones. only in that case would you need an adjustable upper control arm to get the pinion arm back into spec.
     
  3. magana

    magana Member

    Joined:
    Jul 2, 2014
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    I bought a adjustable lower control arm so I should be good right.
     
  4. Markstang

    Markstang Polishing my banhammer Staff Member

    Joined:
    Nov 5, 2012
    Messages:
    1,004
    Likes Received:
    73
    Trophy Points:
    58
    Yep, just make sure to match the lengths
     
  5. magana

    magana Member

    Joined:
    Jul 2, 2014
    Messages:
    12
    Likes Received:
    0
    Trophy Points:
    11
    Thanks I appreciate it