1. Welcome To V6Mustang.com!

    We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

    Registering is free and easy! Hope to see you on the forums soon!

p1sc procharger installation manual

Discussion in '1994-2004 V6 Mustang Tech' started by Milo, Mar 24, 2008.

Social Buttons
  1. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    anyone know where i can get an installation manual.. im buying a used head unit and dont know where to get that info....any help is appreciated..
  2. T.0_5spstang

    T.0_5spstang loves boost:)

    Joined:
    Apr 12, 2006
    Messages:
    1,872
    Likes Received:
    0
    Location:
    Toronto
    Have you tried contacting procharger? they can maybe help you out.

    Good to hear your geting some FI:cool::thumbup:
  3. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    yea ill try contacting them.. i just want to make sure the deal goes thru first... how much you think will cost to get it installed and tuned??? will i need any sct chip or tuning file for this?
  4. ESG-642T

    ESG-642T Custom Camshaft's R US

    Joined:
    Apr 24, 2006
    Messages:
    2,024
    Likes Received:
    0
    Location:
    Tx
    Noticed you said head unit, and not used kit...


    You'll need a tune, and you should be able to install it yourself with a friend.
  5. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    yes will have to get all of the rest of the parts
  6. blue2002

    blue2002 Contents under pressure.

    Joined:
    Apr 15, 2005
    Messages:
    683
    Likes Received:
    0
    Location:
    Long Island
    call up procharger, they sent me one for free
  7. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    what gauges are needed with the procharger unit? boost, oild and temp?
  8. blue2002

    blue2002 Contents under pressure.

    Joined:
    Apr 15, 2005
    Messages:
    683
    Likes Received:
    0
    Location:
    Long Island
    I have a boost gauge, oil press. and water temp

    I want to get a wideband and fuel psi gauge in the future, those are good to have
  9. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    once a procharger system is installed is the car driveable without a tune? will i need a new serpentine belt also?
  10. GhostRider99

    GhostRider99 Seek and DesTory!!!!

    Joined:
    Jul 30, 2004
    Messages:
    908
    Likes Received:
    1
    Location:
    Pasadena, CA
    the car is driveable but don't WOT, and keep it under 3k. Might have trouble if your running bigger injectors but not a big deal, just might have to hold the gas to get her started. Yes you will need a new belt, not sure the size, do a search if no one answers but that will be a starting point, might have to go back a few times for larger or smaller size, i'm going back tomorrow for the 3rd time to get abit smaller belt.
  11. DRAGRACIN365

    DRAGRACIN365 New Member

    Joined:
    Apr 19, 2005
    Messages:
    17
    Likes Received:
    0
    Location:
    Charlotte, NC
    I have worked woth Procharger in the past and they have been great to deal with. They will send you a manual free and the techs will help you out on belt model numbers, etc.
  12. T.0_5spstang

    T.0_5spstang loves boost:)

    Joined:
    Apr 12, 2006
    Messages:
    1,872
    Likes Received:
    0
    Location:
    Toronto
    I have oil presure, water temp and boost. Geting a wideband installed soon.

    If you have put in the big injectors the car will run like crap. And its not a good idea to have it runing for long with the bigger size injectors. You could get a tune for the injectors and then drive it over to a shop (not geting into boost) and have them fully tune up the car.
  13. Milo

    Milo Active Member

    Joined:
    Nov 19, 2006
    Messages:
    239
    Likes Received:
    0
    Location:
    Canada
    there was a p1sc unit up on ebay, for a good price... but got outbid at 30 sec left of the auction... pretty bumped about it, because was a pretty good price... so the deal didnt go thru and dont know where to search now.... for anyone that readingg this thread, im still looking for a p1sc procharger unit.....
  14. CragarShinoda

    CragarShinoda Go Tennessee Vols!!!

    Joined:
    Jun 15, 2003
    Messages:
    516
    Likes Received:
    0
    Location:
    Often times found passed out behind the bar. Also
    Def. check with PC, they will send you a tech manual for free. Here are the parts you will need. Head unit bracket ($89 for GTs, not sure for V6s), belt, plumbing, couplers and clamps, MAF sensor adapter (check Autozone, they had one that will fit Mustangs for like $18, Procharger asks around $50) Intercooler, fuel injectors, tuner or chip, bypass valve, rubber blow off valve flex hose (go to Lowe's to save some cash here), misc. bolts, vacuum hose and Tee for bypass valve, intake tube, air filter, intercooler mounting bracket fuel pump, and elbow couplings. This is what you will need to make an original Procharger install, of course you can opt not to go with the cooler and save yourself some $$$ and some extra plumbing by routing the discharge into the MAF and directly into the Tbody. Of course, you will not run as efficiently. Also, the head unit can be rotated by unbolting (loosly) the allen bolts and rotating the front housing to put the discharge tube where you need it, just make sure to keep the blue Procharger label pointing up or else you will not properly circulate the oil. Oh, and make sure to pick up a three pack of Procharger oil... only takes 1 bottle, but will save you $$$ getting it all at once. Good luck!
  15. CragarShinoda

    CragarShinoda Go Tennessee Vols!!!

    Joined:
    Jun 15, 2003
    Messages:
    516
    Likes Received:
    0
    Location:
    Often times found passed out behind the bar. Also
    By the way, if you know of someone who polishes metal, these things polish up nice! Here are a couple of my Prochargers.

    Attached Files:

  16. Stangcharger3.8

    Stangcharger3.8 New Member

    Joined:
    Aug 20, 2004
    Messages:
    1,133
    Likes Received:
    0
    Location:
    Edmond, OK
    just some info.

    if you want to get a A/F guage for your pod. get the expensive $200+ one.

    The $50-100 A/F guages are crap and are not accurate. it is a waste of money.

    It is something i would recommend just to always make sure your safe.
  17. CragarShinoda

    CragarShinoda Go Tennessee Vols!!!

    Joined:
    Jun 15, 2003
    Messages:
    516
    Likes Received:
    0
    Location:
    Often times found passed out behind the bar. Also
    Agreed, be sure to get a wideband.