Split Port Swap 96 Mustang

douglass

Active Member
I am using a the stock 96 mustang intake. I cut off the bend off the stock intake where it goes into the throttle body. My buddy had the cupler laying arouind I think for a 5.0 fox body that I used to connect the intake to the SC throttle body.
 

1998232v6

2004 Silver Cobra
I ended up using the 5.0 throttle body and I had to weld the super coupe throttle cable bracket to my mustang one to make it work. I also had to weld the metal cooling line that comes out of the 1998 v6 water pump and use a “tee” to get it to miss the SC belt. It was a hassle
 

douglass

Active Member
I did something similar this time with the water pump so I would not have to swap out the sc timing cover/water pump. Super tight fit, and I had to cut off a rib of the belt for it to clear.



 
Last edited:
Top