Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

Swapping Headlamp Switch To Switch W/Fog

Discussion in '2005-2010 V6 Mustang Tech' started by 08'MustangDude, Sep 5, 2018.

  1. 08'MustangDude

    08'MustangDude Active Member

    Joined:
    Jan 31, 2018
    Messages:
    272
    Likes Received:
    40
    Trophy Points:
    28
    OE Without the Fog Position:
    [​IMG]

    Pops right out with a flat-head screwdriver:
    [​IMG]
    [​IMG]

    OE Switch With Fog Position:
    [​IMG]

    Plugged In:
    [​IMG]

    Done:
    [​IMG]

    Will see if Ford-VCM allows me to program the SBJ for the fog-light switch. The Fog Fuse has power,
    and when a fuse is plugged in, the Fog Relay pins have power. I put the trunk release relay into the
    Fog relay plug, and pulling up does not trigger the relay as it is, so my guess is the SBJ needs programmed
    for it. I know I can tap into the wire from inside, but I wanna see what the Tool does... The OBDII Ford VCM
    I have claims: Control unit coding, PATS Immobilizer operations, and Flash and serial memory programming.