Welcome To V6Mustang.com!

We are the oldest and largest V6 Mustang forum on the internet. If you have any questions about your V6 Mustang or just want to connect with other V6 Mustang owners around the world, you have found the best place on the internet to do that.

Registering is free and easy! Hope to see you on the forums soon!

T-5 clutch question.

Discussion in '1994-2004 V6 Mustang Tech' started by bond99, Feb 25, 2009.

  1. bond99

    bond99 New Member

    Joined:
    Nov 17, 2005
    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Cols.O
    Will any clutch designed for a Mustang T-5 work on a 99' V6? I've noticed the aftremarket 5.0 GT clutches cost less than aftermarket V6 clutch packages, I've done a bit of reading on this, but I thought get a last discusion in before buying time.
     
  2. mfracing

    mfracing Senior Member

    Joined:
    Apr 2, 2002
    Messages:
    1,279
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    n, cali.
    when we built my motor i replaced the clutch with a stock ford v6 clutch the old one was still good. you can pay now or you can pay later!
     
  3. ShadowFax95

    ShadowFax95 New Member

    Joined:
    Dec 17, 2001
    Messages:
    94
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Atlanta
    To use the V8 10.5" clutches you need to use the Spec Aluminum Flywheel that accepts both bolt patterens
     
  4. ts3096

    ts3096 New Member

    Joined:
    Aug 14, 2006
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    0
    That or have a michine shop drill and tap your flywheel for the V8 clutch