V6 swap help

V6 swap

New Member
I put a 98 cobra motor in a 2000 v6.In front of the ecu are three connectors.two go under the dash and one goes to the floor on the 2000 and now I have all female connector from the body to the engine harness.Does anyone know if they make adapters to make them compatible


Active Member
You will probably have to get on ebay and search for a factory service manual for each car. The whole volume is 4 books, but sometimes you can find people selling the wiring diagram book separately for $30 or so. Or rather, you need to at least get one for the 98 cobra, as I have the whole set for the 2000 v6 that I could scan pictures of if you needed.