Windstar intake kit

[NMStang218]

Going to give this another go since the buyer backed out a few years ago.

WINDSTAR kit $215 PLUS shipping OBO
-Windstar upper intake,IAC relocation bracket, VAP throttle body, VAP angled throttle body spacer, misc couplings and hoses. Also have some bolts. IAC mount has been "cut" off of intake for more clearance, but could be improved.

 

[Lonnie-S]

Do you know which years of lower intake manifolds match up with the Windstar upper. The dual port 3.8L I have is a 2000 Mustang.

Thanks,

 

[NMStang218]

If I remember correctly, it will fit (with some modification) any any split port 3.8 intake: For mustangs 99-04.

 

[NMStang218]

Will entertain offers

 

[dave johnson]

still have? take 200?

 

[calman1955]

Going to give this another go since the buyer backed out a few years ago.

WINDSTAR kit $215 PLUS shipping OBO
-Windstar upper intake,IAC relocation bracket, VAP throttle body, VAP angled throttle body spacer, misc couplings and hoses. Also have some bolts. IAC mount has been "cut" off of intake for more clearance, but could be improved.

Hello ,
I am Cal from a long line of automotive mechanics ,since high school ., now Living in Central Florida,..
I would like a 05 Mustang upgrade with
Windstar intake kit, IS It For Sale , we are interested ......Could you take 180 dollars ???
Thanks for the Listing ......Respectfully Cal Florida...........

 

[08'MustangDude]

calman, this is NOT for the 4.0 V6.... Everything here, and the other
continually says 3.8, 3.8, 3.8, if you have a V6, you have a 4.0, and is a
completely different motor...

 

[calman1955]

Fear Sirs ,,, My 2044 Mustang V6 3.8l ...the Windstar Manifild Mud Will work , Sorry to inform you ((Dude))....I am shopping around for the "Windstar 96-98 Manifold Mods with a phenolic upper gasket to Fit...do I buy one or do I have one made, What is the Best Bang for the buck..Do I replace upper manifold gasket factory stock ..I wish I knew how much Lift I Nedd for the Mods.....thanks Yawl ...

 

[calman1955]

correction 2004 Mustand V6 3.8 , thanks you much

 

[08'MustangDude]

Hello ,
I am Cal from a long line of automotive mechanics ,since high school ., now Living in Central Florida,..
I would like a 05 Mustang upgrade with

That was what you wrote, which is why I replied. Don't call me out
AFTER you correct yourself, not my fault you can't type worth a ****.

Fear Sirs ,,, My 2044 Mustang V6 3.8l ...the Windstar Manifild Mud Will work , Sorry to inform you ((Dude))....I am shopping around for the "Windstar 96-98 Manifold Mods with a phenolic upper gasket to Fit...do I buy one or do I have one made, What is the Best Bang for the buck..Do I replace upper manifold gasket factory stock ..I wish I knew how much Lift I Nedd for the Mods.....thanks Yawl ...

Like I said...

 

[Ashley]

Going to give this another go since the buyer backed out a few years ago.

WINDSTAR kit $215 PLUS shipping OBO
-Windstar upper intake,IAC relocation bracket, VAP throttle body, VAP angled throttle body spacer, misc couplings and hoses. Also have some bolts. IAC mount has been "cut" off of intake for more clearance, but could be improved.

Is this still available

 

[NMStang218]

Still available

 

[camacho]

NMStang218, what else is needed to have this complete for my swap?

 

[Joseph Witherington]

Is this still available?? I’m very interested and have payment ready.

 

[Project M]

Still available

I'm in Albuquerque, if this is still available

 

[NMStang218]

Hi guys, sorry for being AFK. Seems like there has been a lot of activity...to say the least. I'm going to confirm this weekend that I still have everything described in the first post and first 250$ (shipped) available via PayPal or Venmo takes the whole lot.

Also as a side note, I might be going a different direction and parting my current motor ( heads, cam, lifters) but not 100% yet.

 

[Project M]

Hi guys, sorry for being AFK. Seems like there has been a lot of activity...to say the least. I'm going to confirm this weekend that I still have everything described in the first post and first 250$ (shipped) available via PayPal or Venmo takes the whole lot.

Also as a side note, I might be going a different direction and parting my current motor ( heads, cam, lifters) but not 100% yet.

 

[Project M]

Hey, where are you located?
I'm in Albuquerque.

 

[NMStang218]

I am in AZ
Everything would be shipped FedEx (ground/Home delivery.)

 

[NMStang218]

Still for sale